 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Data Sheet I27405 07/01 100MT160P THREE PHASE BRIDGE Power Module 100 A Features Solderable nickel plated terminals UL under approval Major Ratings and Characteristics Parameters IO @ TC IFSM @ 50Hz @ 60Hz I2t @ 50Hz @ 60Hz I t VRRM TSTG range TJ range 2 100MT...P 100 80 450 470 1013 920 10130 1400 & 1600 - 40 to 125 - 40 to 150 Units A C A A2s A2s V C www.irf.com 1 100MT160P Preliminary Data Sheet I27405 07/01 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code reverse voltage V 140 160 VRRM, maximum repetitive peak reverse voltage V 1400 1600 VRSM, maximum non-repetitive peak V 1500 1700 IRRM max. @ TJ = 125C mA 5 100MT140P 100MT160P Forward Conduction Parameter IO IFSM Maximum RMS output current @ Case temperature Maximum peak, one-cycle forward, non-repetitive on state surge current I2t Maximum I2 t for fusing 100MT...P 100 80 450 470 380 400 1013 920 600 665 Units Conditions A C A t = 10ms t = 8.3ms t = 10ms t = 8.3ms A2s t = 10ms t = 8.3ms t = 10ms t = 8.3ms A2s V m V Ipk = 100A, TJ = 25C tp = 400s single junction @ TJ max. No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Initial TJ = TJ max. 120 Rect conduction angle I2t VF(TO) rt VFM Maximum I2t for fusing Value of threshold voltage Slope resistance Maximum forward voltage drop 10130 0.75 8.1 1.51 t = 0.1 to 10ms, no voltage reapplied Insulation Table Parameter VINS RMS insulation voltage 100MT...P 3500 Units Conditions V TJ = 25oC all terminal shorted f = 50Hz, t = 1s 2 www.irf.com 100MT160P Preliminary Data Sheet I27405 07/01 Thermal and Mechanical Specifications Parameter TJ Tstg RthJC Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to case 0.19 1.14 0.22 1.29 RthCS T wt Maximum thermal resistance, case to heatsink Mounting torque 10% to heatsink Approximate weight 65 g 4 Nm 0.1 K/W K/W DC operation per module DC operation per junction 120 Rect condunction angle per module 120 Rect condunction angle per junction Per module. Mounting surface smooth, flat and greased. Heatsink compound thermal conductivity = 0.42W/mK A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. 100MT...P - 40 to 150 Units Conditions C -40 to 125 C Ordering Information Table Device Code 10 0 MT 160 P B 1 2 3 4 5 1 2 3 4 5 - Current rating code Circuit configuration code Essential part number Voltage code: Code x 10 = VRRM (See Voltage Ratings table) Pinout code: A = Flat pins B = Round pins www.irf.com 3 100MT160P Preliminary Data Sheet I27405 07/01 Outline Table 100MT...PA (Flat pin) + - ~ Dimensions in millimeters 100MT...PB (Round pin) + - ~ Dimensions in millimeters 4 www.irf.com 100MT160P Preliminary Data Sheet I27405 07/01 Maximum Allowable Case Temperature (C) 140 120 100 80 60 40 40 50 60 70 80 90 100 110 120 130 Total Output Current (A) Fig. 1 - Current Rating Characteristics Instantaneous On-state Current (A) 1000 RthJC (DC) = 0.19 K/W 120 (Rect) 100 10 Tj = 150C Tj = 25C 1 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous On-state Voltage (V) Fig. 2 - On-state Voltage Drop Characteristics Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) 400 350 300 250 200 150 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 500 450 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 400 Initial T j = 125C No Voltage Reapplied 350 Rated V rrm Reapplied 300 250 200 150 100 50 Per Junction 0 0.01 0.1 Per Junction 100 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 1 10 Pulse Train Duration(s) Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 3 - Maximum Non-Repetitive Surge Current 500 Maximum Total Power Loss (W) Tj = 125C 400 300 200 100 0 0 20 40 60 80 Total Output Current (A) 120 (Rect) Rt hS 0.0 A = 5K 0 .0 0.1 /W 25 K/ K/ W W 0.2 K/W 0.3 K/W 0.5 K/W 1 K/W -D elt a R 0 30 60 90 120 150 100 Maximum Allowable Ambient Temperature (C) Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink) www.irf.com 5 100MT160P Preliminary Data Sheet I27405 07/01 Transient Thermal Impedance Z thJC (K/W) 10 Steady State Value RthJC per junction = 1.14 K/W DC Operation) 1 0.1 0.01 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 6 - Thermal Impedance Z thJC Characteristics Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/01 6 www.irf.com |
Price & Availability of 100MT160P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |